Clamshells OD-Mounted Pipe Cutting and Pipe Beveling Machine

Home
$
Pipe-beveling-Machines
$
Clamshells OD-Mounted Pipe Cutting and Pipe Beveling Machine

Fe Powertools Clamshells
The OD-Mounted Pipe Cutting and Pipe Beveling Machine is ideal for all types of pipe cutting, pipe beveling and end preparation. The split frame design allows the machine to split in half at the frame and mount around the OD of the in-line pipe or fittings for strong, stable clamping. The equipment performs precision in-line cut or simultaneous cut/bevel, single cut/bevel,single point,counterbore and flange facing operations, as well as weld end preparation on open ended pipe, Ranging from 3/4 to 60 inches O.D.(DN20-1500), on most wall thicknesses and material.

Datasheet

Clamshells OD-Mounted Pipe Cutting and Pipe Beveling Machine

Specification OD-Mounted Pipe Cutting and Pipe Beveling Machine

Drive Options: Pneumatic, Hydraulic, and Electric
Air requirement: 1500L-3000L Per minute @0.6/0.7Mpa
(55-110CFM,90PSI)
Hydraulic requirement: 2-60L per minute @6-12.5Mpa
Electric requirement:220-240V 1PH 50/60HZ Feed mode: Star wheel, automatically
Feed rate: Fixed@0.083mm per circle

Features OD-Mounted Pipe Cutting and Pipe Beveling Machine

Low Axial & Radial Clearance
Tool feed automatically
Cut and bevel pipe of any wall thickness.
Materials include: Carbon steel, alloy, stainless steel ,duplex etc. Pneumatic, electric and hydraulic type for option
Machining OD of pipe from 3/4” upto 60”

Clamshells-OD-Mounted-Pipe-Cutting-and-Pipe-Beveling-Machine

Schematic View
Clamshell Split Frame Pipe Cutters and Bevelers

Typical Buttwelding Joint
Different welding requirement and welding technology always required different welding seam. Mostly comply with ASME B16.[1].25, but some special demand.
Better to advise us before you place the order.

Clamshell Split Frame Pipe Cutters and Bevelers