• Your Need for Power Is Our Business
  • Magnetic drilling machines - Hole cutters - Annular cutters - Accessories
  • PUNCHING MACHINES

    Double action - fully automated process of punching and return, Wide range of hole diameters up to 27mm, Modern construction, Intelligent control system with inching and automatic load detection, Mode indicator light, Protection against accidental start-up, Easy to handle in unusual positions, All connecting ports located at the back, Wide range of specially shaped punches and dies, [...]

    Read more

    B 2 AIR

    8 Nov 2021
    B 2 AIR

    Technical data:  Chamfering angle: 45° Chamfering width (hypotenuse): 2 mm / 0.08 i Speed 23,000 rpm. Feed manual Air consumption 320 l/min Dimensions: 112 x 60 x 48 mm Weight: 400 g / 0.88 lb Number of cutting tips 3 pcs

    Read more

    FE PBM 660 (ODE)

    Motor: Metabo model: W24-230MVT RPM: N6600/Min Working Range: 508-660MM Wall thickness less 30MM (shells availabe from 50MM-1230MM)

    Read more

    Die Grinder

    The Die Grinder can be used to clean dies rotors, backing plates and brake pad mounts. Easy to adjust the power speed.Free Speed: 22,000 RPM Collet : 6 mm (1/4") Power : 0.37 KW (0.5 HP) Exhaust: Rear Air Inlet: 1/4" Air Consumption: 99 LPM (3.5 CFM) Noise LpA / LwA : 79.5 DB / 90.5 DB Vibration: 2.51 m/s2 Length: 178 mm (7") Net Weight: 0.6 kgs (1.3 lbs)

    Read more

    Beveler UZ-50 for steel, stainless steel, Hardox, Domex and Aluminium

    Beveler UZ-50 for steel, stainless steel, Hardox, Domex and Aluminium. Automatic feeding, automatic feed speed adjustment and high speed milling head  automatic feeding, automatic feed speed adjustment with inverter, 0 -1,2m/min high speed milling head with very resistant inserts, max. width of bevel 62mm/15°, 50mm/45° 15-60° infinitely variable angle, without replacing[...]

    Read more

    Impact Wrench

    Ultra lightweight, being only 2,3 KG this 205MM short Impact Wrench 18V with two 4.0 Ah batterys. A Brushless motor with an extra high couple causing it to last 10x longer en being 30% more efficient. deliverd in a plastic case with an extra battery and a charging station.-Ultra lightweight 2,3 KG ( including battery ) -Short machine 205MM -Powerfull Torque from 650 Nm. -No power loss and reduced [...]

    Read more

    Bevelmachine FEB 645

    Chamfer angle: 45º Chamfer widht: 0 - 15 mm Cutter type: ZFR 645 Dimensions (LxBxH): 400 x 350 x 300 mm Approx. net weight: 10.2 kg Voltage: 220-240 V/50-60 Hz and 110-125 V/50-60 Hz Motor output: 2300 W Speed: 1600-3000 rpm Feed: Manual Protection type: IP 20 

    Read more

    Bevelmachine FEB 630

    The new FEB Series of Beveling Machines are tailor made to meet the requirements of every operator. The new FEB 500 & 600 series from Fe Powertools is designed for maximum performance and optimal comfort. With the new milling head technology, the FEB Beveling Machines can also operate at low speeds without jerking or jumping. The result is optimally milled edges, even when rounding. The FEB [...]

    Read more

    Bevelmachine FE 545

    The new FEB Series of Beveling Machines are tailor made to meet the requirements of every operator. The new FEB 500 & 600 series from Fe Powertools is designed for maximum performance and optimal comfort. With the new milling head technology, the FEB Beveling Machines can also operate at low speeds without jerking or jumping. The result is optimally milled edges, even when rounding. The FEB [...]

    Read more

    Bevelmachine FEB 530

    The new FEB Series of Beveling Machines are tailor made to meet the requirements of every operator. The new FEB 500 & 600 series from Fe Powertools is designed for maximum performance and optimal comfort. With the new milling head technology, the FEB Beveling Machines can also operate at low speeds without jerking or jumping. The result is optimally milled edges, even when rounding. The FEB [...]

    Read more