Tap chucks and holders
Tap chucks and holders
Fe Powertools tapping equipment.
A special selection of top quality tap chucks and holders to fit in your magnetic drilling machines.
Tap chucks FEQTE 001, 002 and 003 can be used in your FE 100 R/L mag drill. FEQTE 004 can be used in your FE 50 R/L mag drill
FEQTE Tap chucks
| Article no# | Holder | Thread |
| FEQTE 001 | Morse taper 3 | M3-M14 |
| FEQTE 002 | Morse taper 3 | M5-M24 |
| FEQTE 003 | Morse taper 3 | M14-M30 |
| FEQTE 004 | Morse taper 2 | M5-M16 |
Tap holders for FEQTE 001
| Article no# | Thread | Shank | Square |
| FEQTE001.3 | M3 | 3.5 | 2.7 |
| FEQTE001.4 | M4 | 4.5 | 3.4 |
| FEQTE001.5 | M5 | 6 | 4.9 |
| FEQTE001.8 | M8 | 8 | 6.3 |
| FEQTE001.10 | M10 | 10 | 8 |
| FEQTE001.12 | M12 | 9 | 7.1 |
| FEQTE001.14 | M14 | 11 | 9 |
Tap holders for FEQTE 002
| FEQTE002.5 | M5-M6 | 6 | 4.9 |
| FEQTE002.8 | M8 | 8 | 6.3 |
| FEQTE002.10 | M10 | 10 | 8 |
| FEQTE002.12 | M12 | 9 | 7.1 |
| FEQTE002.14 | M14 | 11 | 9 |
| FEQTE002.16 | M16 | 12 | 9 |
| FEQTE002.18 | M18 | 14 | 11 |
| FEQTE002.20 | M20 | 16 | 12 |
| FEQTE002.22 | M22/M24 | 18 | 14.5 |
Tap holders for FEQTE 003
| FEQTE003.14 | M14 | 11 | 9 |
| FEQTE003.16 | M16 | 12 | 9 |
| FEQTE003.18 | M18 | 14 | 11 |
| FEQTE003.20 | M20 | 16 | 12 |
| FEQTE003.22 | M22/M24 | 18 | 14.5 |
| FEQTE003.27 | M27 | 20 | 16 |
| FEQTE003.30 | M30 | 22 | 18 |
Tap holders for FEQTE 005
| FEQTE004.5 | M5/M6 | 6 | 4.9 |
| FEQTE004.5C (clutch) | M5/M6 | 6 | 4.9 |
| FEQTE004.8 | M8 | 8 | 6.3 |
| FEQTE004.8C (clutch) | M8 | 8 | 6.3 |
| FEQTE004.10 | M10 | 10 | 8 |
| FEQTE004.10C (clutch) | M10 | 10 | |
| FEQTE004.12 | M12 | 9 | 7.1 |
| FEQTE004.12C (clutch) | M12 | 9 | 7.1 |
| FEQTE004.14 | M14 | 11 | 9 |
| FEQTE004.14C (clutch) | M14 | 11 | 9 |
| FEQTE004.16 | M16 | 12 | 9 |
| FEQTE004.16C (clutch) | M16 | 12 | 9 |
