Vacuum plate
Vacuum plate – Drillmate
Vac-Pad vacuum based clamp for industrial scale hole drilling
Compatible with Most Brand Battery Operated Portable Drill Units, and Drilling systems.
Vacuum plate
Drillmate feeding force with vacuum plate. Powered by compressed air.
The vacuum plate attaches to all flat surfaces and colanders with a holding force of 360 kg.
Adapted to all drills with a 46 mm neck. Various plastic bushings (DMSK100) can be purchased for thinner necks on the drilling machine.
Distance center drill to front edge is 65 mm.
FACTS:
Dimension neck: 46 mm
Stroke length: 270 mm
Vacuum plate: 150 x 380 mm
Height: 530 mm
Holding force: 360 kg
Air pressure: 5.5 bar
Air consumption: 65 L/min
Connection: ½” /NPT
Weight: 5.2 kg
Vac‐Pad with steel plate part number: D110SP
The Vac‐Pad enables magnetic drilling machines to effectively operate on non‐ferrous material (stainless steel, aluminium, brass, copper), providing the ability to convert a magnetic drilling machine to cut on non‐magnetic or thin surfaces of 1mm upwards, where a magnetic drill will not suffice.
- Requirescompressedairpressure(minimum450kPa (70PSI)
- Covers a complete range of magnetic drilling machines
- This unit has a holding power of 320kgs with air pressure supplied to the vacuum generator of 450kpa+
- Gives full stability due to the stabilizing feet incorporated
- Steel plate size: 200 x 135mm Weight is 4.2kgs
Mega VacPpad part number:: D110MEG
The Mega Vac-Pad is designed to accept large magnetic drills with drilling capacity up to 200mm dia. holes into all types of steel including non-ferrous material.
- Requires compressed air pressure (minimum 450kPa (70 PSI))
- Covers a complete range of larger magnetic drilling machines
- Allows smaller machines to drill in multiple positions without moving fixture
- This unit has a holding power of 820kgs with air pressure supplied to the vacuum generator of 450kpa
- Gives full stability due to the stabilizing feet incorporated
-
Steel plate size 345 x 250mm Weight: 11.2kgs
